CURRENT RESEARCH STUDENTS
Ph.D.Thesis
Mohak Shukla (Research Theme: ML and Statistical Physics with applications in Condensed Matter Physics (Employed and Part-Time)).
Khashti Datt Pandey (Research Theme: Micro-force Sensing and Micro-rheology using Magnetic Micromanipulation (Institute Fellow)).
Ankush Kumar (Research Theme: Scalable approaches for synthesis of CNMs for functional nanocomposites (Institute Fellow)).
Abhash Shukla (Research Theme: Off-the-grid Atmospheric Water Harvesting (DST-TDP & MoEFCC projects); Jointly supervised with Dr. R. Raj from the Department of Mechanical Engineering (Project Staff)).
Richa Bharti (Research Theme: Neuromorphic devices (PMRF Research Scholar)).
Lipika Sasmal (Research Theme: Artificial Neurons on Chip (Project Staff)).
Mohammed Qadeer (Research Theme: Low-GWP alternative refrigerations (MoEFCC project); Jointly supervised with Dr. R. Raj from the Department of Mechanical Engineering (Project Staff)).

M.Sc. Thesis


B.Tech. Thesis
Satyam Sahoo, Developing Energy Efficient and Biologically Plausible Online Learning Rules for Spiking Neural Networks (SNNs).
Pranitha Moluguri, Design and Development of an Efficient Low-Voltage Charging Module for Hydrogel-Based Piezoelectric Energy Harvesting Systems.
Alumni
Ph.D. Thesis

Graduated 2019 (Now: Faculty member at IIT Jodhpur) Link.
Dr. Ashutosh
Kumar (Thermoelectric Transport Studies in Rare Earth-Transition Metal Oxides and their Composites)
Graduated 2019 (Now: Faculty member at IIT Bhilai) Link.
Dr. Atul
Kumar (Certain Theoretical and Experimental aspects of CZTS
based solar cells).
Graduated 2020 (Now: Faculty member at KL University) Link.
Dr. Karuna Kumari (Charge Transport Studies of Perovskite and 2D material/Oxide Composite Systems; Co-advised with Dr. S. Ray)
Graduated 2022 (Now: Faculty member at HKBK College of Engineering, Bengaluru) Link.
Dr. Apurva Sinha (Ovchinnikov Ferromagnetism in Graphene Oxide and Reduced Graphene Oxide). Graduated 2022 (Now: Post-doc at University of Saskatchewan, Canada) Link.
Dr. Chaitanya
Bathina (Fabricating
Eco-friendly Superhydrophobic Coating and Exploiting Biomass Energy
Potential for Sustainable Atmospheric
Water
Harvesting; Jointly
supervised with Dr. R. Raj from the Department of Mechanical
Engineering). Graduated
2022 (Now: Post-Doctoral
Researcher at University of Florida) Link.
Dr. Sunil (Design and Development of a Biomass Gasification-Based Off-The-Grid Storage and Processing Units for Perishables; Jointly
supervised with Dr. R. Raj from the Department of Mechanical
Engineering). Graduated
2025 (Now: Deputy Manager, Technology Cell, Lloyd AC Division,
Havells India-Center for Research and Innovation) Link.
Dr. Rahul Sinha (Development
of An Off-The-Grid Climate Control Unit with Built-in Humidity Control
for Storage and Processing of Perishables :
Jointly
supervised with Dr. R. Raj from the Department of Mechanical
Engineering). Graduated
2025 (Now: Institute Post-Doctoral Researcher at IIT Bombay).
Dr. IndranilMaity (Resistive Switching: Role of Defect Tuning and Morphology and the Realization of Synaptic Plasticity; with Co-adviser Dr. S. Ray)
Graduated 2025.
M.Tech. Thesis
Sagnik
Ghosh, Semiconductor Process
Optimization and Integration for the
Elimination of Deep Trench Isolation Crack Issue in High Voltage
Devices (Graduated in Spring 2014); Currently working as Scientist at Institute of Microelectronics, A*STAR, Singapore .
Anup
Kumar, All Oxide Solar Cells
(Graduated in Spring 2014); Currently
with Bihar State
Electricity Board.
Arun
Singh Chouhan, Tuning of
Magnetic
and Electrical Properties in Complex Oxide Thin Films Deposited by
Pulsed Laser Deposition
(Co-adviser: Prof. Lambert
Alff, TU
Darmstadt, Germany, Graduated in 2015). Currently working at Western Digital.
Pradipkumar M. Leuaa, Hierarchically
Nanostructured Tin Sulfide as an Electrode Material for Lithium Ion
Batteries and Supercapacitors
(Co-advised with Dr. A. K.
Thakur, Graduated in 2015); Currently
working at Department of Energy Conversion and Storage, TU Darmstadt,
Denmark.
Akash Das, Image Guided Automated Non-prehensile
Magnetic Micro-manipulation of Cells, (Co-advised with Dr. Atul
Thakur, Graduated in 2015); Currently
with Flipkart.
Upasana
Sahu, Ferromagnet-Superconductor interface phenomenon
(Graduated in 2016); Currently pursuing PhD at IIT Delhi.
Vivek
Singh, Nanostructured Thermoelectrics (Graduated in Spring
2016);
Currently pursuing PhD at IISc
Bangalore.



M.Sc. Thesis
Abhinandan Kumar, Superconducting Antidot Arrays
(Graduated in Spring 2018).
Mohak Shukla, Opinion Modeling (Graduated in Spring 2018); Associate
Director, AI-ML Model Risk at UBS, and also pursuing PhD at IIT Patna
(employed and
part-time).





Swati Singh Shock Waves (Graduated in Spring 2022); Currently pursuing PhD at The University of Massachusetts, Dartmouth.
Venu Goswami Effects of Synchronization on roughness exponent in growing interfaces (Graduated in Spring 2023); Currently pursuing PhD at JNCASR.
Vimal Kumar Optimization of Cold-Chain Network using Optimal Transport Theory (Graduated in Spring 2023).
Shaheen Parween Study of Roughness in V2O5 Thin Film and Cu2-xS Nanoparticles (Graduated in Spring 2023).
Kaustab Bharasa Self-Organized Criticality in Neural Networks (Graduated in Spring 2024).
B.Tech. Thesis
Manas
Haloi, Modeling of Nanoscale MOS
(co-supervised with Dr. A. K.
Mukherjee, Graduated in Spring 2013); Currently
with Tricon
Infotech.
Shivam
Chourey, Development of Magnetically
Controlled Microrobots (co-supervised with Dr.
Atul Thakur, Graduated in Spring 2014); Currently with Siemens.
Kanishka Singh Solanki, Solar Cell Defect Prediction Using Physics-Informed Machine Learning
(Graduated in Spring 2025). Currently
with Flipkart.
Tanishk Kadam, Machine Learning Driven Framework for Simulating Gray-Scott Models (Graduated in Spring 2025); Currently pursuing MBA at IIM Lucknow.
N Ajay, Physics-Guided Generative Adversarial Networkds (Graduated in Spring 2025).
S Ramakrishna, Interpretability and Robustness in Physics Involved Machine Learning Systems
(Graduated in Spring 2025).
Summer Interns
Abhinav Ashesh, Low Cost Solid State Photolithography System Based on
UV LEDs (CUJ; Summer 2014).
Malvika Srivastava, Radio Frequesncy Energy Harvesting (St. Stephens;
Summer 2014).
Ankit Labh, Optimization of CO2 laser cutting parameters for
fabricating microfluidic channels (from IISER Mohali; Summer 2015).
Rupali
Tiwari, Simulation of Solar Cell Structures for High Performance
(Galgotia; Summer 2016).
Monalisa
Yadav, 2D-materials:Theory and Experiments (IISER Kolkata;
Summer 2016).
Shreshtha Chaturvedi, Measuring Memristive Devices (KIIT;
Summer 2024-25; NIUS).
Apoorva Bhatnagar, Modeling Memristive Devices (St. Stephens;
Summer 2024-25; NIUS).
Others
